JVC GR-DV2000 Instructions Manual page 84

LCD Monitor/Viewfinder Indications During Video Recording Only
Q_ Displays the selected Fade/Wipe effect.
{Z 7 _ pg. 34, 35)
_2_ Appears when in the Squeeze, Cinema r)r PS
Wide mode. (_7 ° pg. _,0)
_ Rotates while the tape is running. (_7 _ pg. 18)
_4_ Displays the recording mode (SP or LP).
(_7 _ pg. 15)
Displays the tape remaining time. (_7 _ pg. 18)
_ • "RE(" appears during recording.
• "PAUSE" appears during Record-Standby mode.
{_ 7" pg. 18)
_ Appears when the wind cut mode is engaged to
cut down on noise created by wind. (_7 _ pg. 30)
_@ 5S/Anim.: Displays the 5 second recording mode
or Animation recording mode.
(_ 7_ pg. 30, _)
_@ Appears when the Insert Editing (t_) or Insert
Editing Pause (111_) mode is engaged. (z 7 _ pg. 72)
_@ Displays the sound mode i_r approx. 5 seconds
after turning on the camcorder. (_7 ° pg. 29)
_ Displays the Time Code. (_7 ° pg. 2_, _1)
LCD Monitor/Viewfinder Indications During D.S.C. R ecording Only
Q) Displays the file size of the stored image.
There are 3 modes available: UXGA, XGA and
VGA (in order of quality). (_7" pg. 16)
Appears and blinks during shooting. (zT" pg. 21)
_ Displays the quality of the stored image.
There are 2 modes available: FINE and STD
(standard) (in order of quality). (z 7_pg. 16)
_4_ •Appears during shooting.
• Blinks when a memory card is not loaded.
{z 7" pg. 21 )
_ Displays the number of images that have already
been shot. (_7° pg. 21 )
_ Displays the total number of shots that can be
stored, including those already taken. {_ / pg. 21 )
_ Displays the UXGA mode: [_] (DOUBLE)or []
(ENLARGE). (_7° pg. 16)
These indications also appear during DUAL mode.