JVC GR-DV2000 Instructions Manual page 80

After Use
Turn off the camcr)rder.
Slide and hold OPEN/EJECT in the direction of
the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically. Remove the cassette.
Press "PUSH HERE" to close the cassette holder.
• Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
Slide BAT]'. RELEASE (_) and remove the battery
pacl< _.
PUSH HERE
Remove.
Switch
Cassette
holder cover
BATT. RELEASE
Switch
Cleaning TheCamcorder
To clean tile exterior; wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
Press PUSH-OPEN and ()pen the LCD monitoc
Wipe gently with a soft cloth. Be careful not to
damage the monitoc Close tile LCD monitor.
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
To clean the viewfindeD raise it to the vertical
position. Carefully lift the plastic tab on the
bottom of the viewfindei; and open the hatch
O.
Insert a lens blower or soft cloth into the gap at
the bottom of the viewtinder and clean the
interior of the viewfinder with it l_.
Close the hatch. Tilt the viewfinder back to the
horizontal position and push it back in.
NOTES:
• Av(>id usin_ strong cleaning agent, such as benzine
or alcohol.
• Cleaning should be d_)ne only after tile battery
pack has be_n removed or other power units have
been disconnected.
• Mold may form if tile I_ns is left dirty.
• When using a cleaner or chemically treated ck)th
refer to tile cautions of each product.
_]t Hatch 0
Lens blower-