JVC GR-DV2000 Instructions Manual page 65

VCR CODE LIST
GE
@ @
PHILIPS 0 0
00 00
0 _1 PANASONIC 0 0
e@
00
HITACHI 0 0 0
0
00 00
JVC A 0 0 0 0
B 0 0 RCA 0 0
c
00 O0
MAGNAVOX
0 0 0 0
O0 00
O0 00
0 0
SANYO 0
0
MITSUBISHI
0 0 0 0
0 0
SHARP
0 0
NEC 0 0 0 0
0 0 SONY 0 0
PHILIPS 0 0 0 0
O0 00
O0 00
O0
0 0
TOSHIBA
0 0
O0 O0
0 0 ZENITH 0 0
EN65
RendomAssembleI:dilin9 [R.A.l:dil]
Create edited videos easily using your camcorder as
the sourre player. You can select up to 8 "cuts" for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the MBR (Multi-Brand
Remote) is set to operate with your [)rand of VCR (see
VCR CODE LIST}, but can also be performed by
operating the VCR manually.
Before operation, make sure the batteries are installed
in the remote control _Z_° pg. 61 ).
SET REMOTE/VCR CODE
Turn off tile power to tile VCR and point the
remote towards tile VCR's infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and press button (A) and then (B).
The code is automatically set once you release
MBR SET, and the VCRg power comes on.
Make sure the VCR's power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the
remote can cr)ntrol are PLAY, STOP, PAUSE, FE,
REW and VCR REC STBY (you do not need to
press SHIFT for this one}.
You are now ready to try Random Assemble
Editing.
IMPORTANT
Altbougb tire MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
NOTES:
• If tile VCR_ power does not come on in st_p I, try
another code i}orn tile VCR CODE LIST
• Some brand_ ot VCR d_ not corne on automati-
cally. In this case, turn the power on manually and
t)7 step 2.
• If the remote control is not able t_;contn)l the VCR,
use the controls on tile VCR.
• When the remot_ control's batteries run ()tit, the
VCR brand you have set will be erased.
In that case, replace the old battely with a new one
to reset the V(R brand.