JVC GR-DV2000 Instructions Manual page 70

Display
ADJUSTMENT OF VCR/CAMCORDER
TIMING
Point the remote control at the catrrcorder's remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press the MENU wheel. The Menu Screen appears.
Rotate the MENU wheel to select ,,lt_l VIDEO" and
press it. The VIDEO Menu appears. Then, rotate it to
"SYNCHRO" and press it. The value for "SYN( HRO"
is highlighted.
MENU Wheel
Based on tile diagnostics performed {_° pg. 69), you
car/now advance the VCR's record timing by rotating
the MENU wheel towards "+". You can also delay the
VCR's record timing by rotating the MENU wheel
towards "-". The adjustment range is from 1.3 to
+1.3 seconds, in 0.1-second increments.
Pressthe MENU wheel to finish the setting.
Rotate the MENU wheel to select "41RETURN" and
press it twice.
Now perform Random Assemble Editing beginning
with step 4 on page 67.
NOTES:
• Before perfomling actual Random Assemble Fditing_ do
a f_w Random Assemble Editin_ trial runs to check
whether the w31ue you have input is appropriate or not,
and make adjustment_ accordingly.
• Depending on tile recorder, there may be situations
where the timing difference cannot be fully corrected.