JVC GR-DV2000 Instructions Manual page 7

How To Attach The Lens Hood
Tile provided lens hood helps block out glare when shooting under bright sunlight, tile same way professional
photographers do.
Align the lens hood with the
camcorder's lens and screw
it in clockwise.
Threading
Automatic Demonstration takes place when "DEMO MODE" is
set to "ON" (factory-preset).
• Available when the Power Switch is set to "r_" or "[_" and
no cassette is in the camcorder.
• Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is perfomled for
more than 1 minute after that, the demonstration will resume.
• "DEMO MODE" remains "ON" even if the camcorder power
is turned off.
• To cancel Automatic Demonstration:
1. Set the Power Switch to "[]" while pressing down the Loci<
Button locate(] on the switch and press the MENU wheel.
The Menu Screen appears.
2. Rotate the MENU wheel to select "[[2_ SYSTEM" and press
it. The SYSTEM Menu appears.
3. Rotate the MENU wheel to select "DEMO MODE" and
press it. The Sub Menu appears.
4. Rotate the MENU wheel to select "OFF" anti press it.
5. Rotate the MENU wheel to select "_IRETURN", and press it
twice. The normal screen appears.
MENU Wheel
Sub Menu