JVC GR-DV2000 Instructions Manual page 24

Button
Power Switch
Lock Button
Recording Stall/Stop Button
Shooting
Mode Switch
Progressive ModeRecording
This mode lets you record rrrovhrg irrrages (successive
jitter-free still irrrages) onto a tape. Images can then played
back jittel:free, with superior quality. High-resolution still
images call also be processed on a personal computer or
can be printed out (:_7" pg. 57).
Set the Shooting Mode Switch to "VI DEC)", then set
the Power Switch to "_]" while pressing down the
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
Set "CAMERA MODE" to "PS-VIDEO" in the Menu
Screen _° pg. 28, 29).
To start Progressive Mode Recording, press the
Recording Start/Stop Button.
To End Progressive Mode Recording...
.... press the Recording Start/Stop Button. The camcorder
enters the Record-Standby mode.
NOTES:
• When an image recorded using tile Pr_gre_sive Mode is
played back, the image may not look natural,
• When "CAMERA MODE" is set to "PS-VIDEO'; Picture
Wipe/Dissolve (_" pg, _;4) and some Program AE with
special eflZ( t_ (_ _ pg. 36) cannot be used.
• If SNAPSHOT is pressed in tile PS-VIDEO mode, a
snapshot will be recorded with higher quality than in
VIDEO mode. Howeve# "MULTI-4" and "MULTI-9"
cannot be used (_° pg. 20),