JVC GR-DV2000 Instructions Manual page 15

Power Lamp
l
Power Switch
Lock Button
MENU Wheel
Display
Menu Screen
EN1 5
Recording ModeSetting
Set the tape recording mode depending on your preference.
Set the Power Switch to "[_]" while pressing down
the Lock Button located on the switch, and open the
LCD monitor fully or pull out the viewfinder fully.
The power I_mlp lights and the camcorder is turned
on.
Press the MENU wheel. The Menu Screen appears.
Rotate the MENU wheel to select "1_ CAMERA" and
press it. The CAMERA Menu appears.
Rotate the MENU wheel to select "REC MODE" and
press it. The Sub Menu appears. Select "SP" or "LP"
by rotating the MENU wheel and press it. Rotate the
MENU wheel to select "41RETURN", and press it
twice. The Menu Screen closes.
• Audio Dubbing (_ _" pg. 71 ) and Insert Editing
(_ _ pg. 72) are impossible on a tape recorded in the
LP mode.
• "LP" {Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
• If the recording mod_ is switched during r_cording_ the
playback picture will be bluntfd at the switching point.
• It is recommended that tapes recorded in the LP mode
on this camcorder be played back on &is camcorder.
• During pbyback of a tape recorded on another
camcorde_; blocks of noise may appear or there may be
momentmy pauses in &e sound.