3
Paper size error
• Is paper of the specified size being used?
• No
Use paper of the specified size.
• Yes
Are inlet sensor plates 1 and 2 operating properly (moves freely when they are touched)?
• No
Replace the inlet sensor plate or clean the inlet sensor on the high voltage/sensor board.
• Yes
Does the outlet sensor plate operate properly (moves freely when it is touched)?
• No
Replace the outlet sensor plate or clean the outlet sensor on the high voltage/sensor
board.
• Yes
Replace the high voltage/sensor board.
42640901TH Rev.1
Heat roller
Transfer roller
Toner
Inlet
sensor
sensor 2
Hopping
Exit roller
Outlet sensor
Paper sensor
Paper end sensor
roller
Inlet sensor 1
Oki Data CONFIDENTIAL
Registration roller
56 /