Call Server Commands; Verify Clid - Nortel 1000 Branch of?ce Installation And Commissioning Manual

The lockout affects the Virtual Office login or Branch User Config and
lasts for one hour. This lockout does not survive re-registration of the IP
Phone. However, the installation technician can issue the clearLockout
command to clear the lockout for a particular telephone.
This command has one parameter the TN or IP address of the telephone.

Call Server commands

This section contains LD commands on the Call Server applicable to the
Branch Office feature.

Verify CLID

LD 20 contains the CLIDVER prompt, which is used to verify the proper
composition and configuration of the Calling Line ID (CLID) for ESA and
non-ESA calls. The prompt simulates a call without actually making it and
generates a report showing the CLID, zone numbers, and other information.
LD 20 Generate a CLIDVER report.
Prompt
REQ:
TYPE:
CUST
SORTBY
DN
TN
ESA_ONLY
SHORT
Copyright © 2007, Nortel Networks
.
Response
PRT
CLIDVER
xx
(DN) TN"
x...x,
l s c u
(YES) NO
(YES) NO
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Description
Print
CLID Verification
Customer number as defined in LD 15.
The output/report will be sorted based on this flag.
If the response is DN, the LD prompts the user to
enter the DN, and the output is sorted by the DN.
If the response is TN, the LD prompts the user to
enter the TN, and the output is sorted by the TN.
Directory Number. If no value is entered, the report
includes all Directory Numbers.
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, and u = unit
Flag used to decide if the report should contain
information for ESA call type only or for all call types.
If the ESA package is not enabled, this input prompt
does NOT appear. The report contains non-ESA
data only.
Flag to decide if the output report should be a Short
Report or a Long Report.
Call Server commands 355