Print Branch Office Zone Information - Nortel 1000 Branch of?ce Installation And Commissioning Manual

356 Maintenance and diagnostics
The CLIDVER report contains the CLID composed for the Branch User.
If the report is generated on the main office Call Server, the CLID is
composed as follows:
•
•
If the CLIDVER report is generated on the MG 1000B CP PM, the CLID
is the same as the CLID entry composed in LD 15 (see
"Configuring the MG 1000B zone" (page
Refer to Emergency Services Access: Description and Administration
(NN43001-613) for more information on this feature.
Print Branch Office zone information
LD 117 contains commands to view Branch Office zones at the main office
Call Server.
LD 117 Print zone information.
Command
PRT ZACB [<Zone>]
PRT ZBW [<Zone>]
PRT ZDES [<DESMatchString>]
PRT ZDP [<Zone>]
PRT ZDST [<Zone>]
PRT ZESA [<Zone>]
PRT ZONE ALL
PRT ZONE 0-255
PRT ZTDF [<Zone>]
Copyright © 2007, Nortel Networks
.
If ESA is enabled in the Branch Office, the CLID is the same as the value
entered for the ESA Locator parameter in the CHG ZESA command in
LD 117 (see Procedure 37 "Configuring the main office" (page
step 5).
If ESA is not enabled, the CLID is the same as the CLID entry composed
in LD 15 (see Procedure 9 "Configuring ESN and MG 1000B zones"
(page 210), step 1).
Description
Print a table of Branch Office zone dialing plan entries.
Print a table of zone bandwidth utilization.
Print a table of the zone description entries.
Print a table of Branch Office zone dialing plan entries.
Print a table of Branch Office zone time adjustment properties entries.
Print a table of Branch Office zone Emergency Services Access
parameters.
Print zone information for all zones.
Print zone information for a specific zone.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Procedure 23
257), Step 2).
319),