Operating Parameters; Assumptions; Feature Interactions - Nortel 1000 Branch of?ce Installation And Commissioning Manual

122 Bandwidth Management Support for Network Wide Virtual Office
The customer can check the value of the Current Zone for IP sets using
LD 20, PRT command - as this value is not configurable, no changes are
made to LD 11.

Operating parameters

The following are operating parameters for this feature:
•
•
•
•
•
•

Assumptions

The following configuration is used:
•
•
•
•
•
•

Feature interactions

The following feature interactions exist:
Copyright © 2007, Nortel Networks
.
Only IP Phones with the "IP Client cookies" feature enabled are
supported
The correct BWM calculation for a Virtual Office (VO) IP Phone is
possible only within the home Customer network (when all the systems
are configured with the same VPNI number).
The maximum number of Bandwidth Zones that can be configured on the
Call Servers within the home customer network is limited to 255 (1-255).
The interaction between CS 1000 Release 5.0 and the previous releases
is not supported. Therefore, the correct bandwidth calculation will not
be provided if a remote VO login is performed from a CS 1000 with a
software release that is earlier than CS 1000 Release 5.0. In this case
the earlier release's bandwidth calculation method is used.
If two or more Call Servers have the same VPNI and Bandwidth Zone
configured, the usage in this zone can't be synchronized between these
Call Servers.
The feature supports only one customer. If more than one customer is
configured, the customer with the lowest customer number is supported.
Bandwidth zones are allocated on a Network-wide basis.
All zones in the network are configured on all the Call Servers.
All Call Servers within the network will have the identical copy of the
zone table and each individual zone policy.
The VPNI number will be configured as the same for all Call Servers
within the network.
Call Servers that belong to different networks will have different VPNI
numbers. Each network has its individual VPNI numbers.
The identical copy of the zone table within the network should be
configured manually unless a synchronization mechanism is introduced.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007