Nortel 1000 Branch of?ce Installation And Commissioning Manual page 309

Configuring the dialing plan for PSTN access to Branch Users in Normal Mode 309
Prompt Response
DEL (0)-19
ISPN NO
x...x
INST
CTYP
INTL
NPA
NXX
LOC
SPN
LD 86 Configure Route List Index.
Prompt Response
REQ NEW
xx
CUST
FEAT RLB
RLI
0-127
0-255
0-999
ENTR 0-63
X
LTER NO
ROUT
0-511
0-127
...
1-999
DMI
Copyright © 2007, Nortel Networks
.
Description
Number of leading digits to be deleted.
This would normally be configured to remove the unique
non-dialable number that identifies the Branch Office,
configured in the ZDP property of the Branch Office zone in LD
117 at the main office
IP Special Number
Insert. Up to 31 leading digits can be inserted.
Call type used by the call. The far-end switch must recognize
this call type.
International
National
Local PSTN
UDP
Special Number
b. Configure the RLI in LD 86 with the RLB feature.
Description
Add new data.
Customer number as defined in LD 15
Route List data block
Route List Index to be accessed
CDP and BARS
NARS
FNP
Entry number for NARS/BARS Route List
Precede with x to remove
Local Termination entry
Route number of the Virtual Trunk as provisioned in LD 16.
Range for Large System and CS 1000E system
Range for Small System and Media Gateway 1000B
Digit Manipulation Index number as defined in LD 86, FEAT
= DGT (Step
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
(Step 2).
a).