Enabling Codecs - Nortel 1000 Branch of?ce Installation And Commissioning Manual

3
4
5
6
7
8
9

Enabling codecs

In Element Manager, select the codecs that will be enabled for calls on the
Call Server, and define the associated parameters, such as payload size.
Select the Nodes: Servers, Media Cards web page under IP Network.
Then click Edit on the Node Configuration web page, and click VGW and
IP phone codec profile. Select an existing codec or configure a new
one in the VGW and IP phone codec profile section, shown in
"Configuring a codec" (page
and Configuration (NN43001-313) for full instructions on configuring a
codec.
Copyright © 2007, Nortel Networks
.
Configuring Bandwidth Management parameters 63
Choose unique Bandwidth Zone numbers for the Virtual Trunks in
the network.
Choose the codecs that will be enabled on each Call Server.
Identify what the interzone codec strategy will be (BB-Best
Bandwidth or BQ-Best Quality) for each zone in the network.
Identify what the intrazone codec strategy will be (BB-Best
Bandwidth or BQ-Best Quality) for each zone in the network.
Calculate the bandwidth available for intrazone calls for each zone
in the network.
Calculate the bandwidth available for interzone calls for each zone
in the network.
Calculate the bandwidth available for intrazone calls
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
—End—
64). Refer to IP Peer Networking: Installation
Figure 13