Handset Feature Key Settings For The 9480I Ct And 57I Ct - Aastra 5i Series Administrator's Manual

IP Phone Administrator Guide
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters

Handset Feature Key Settings for the 9480i CT and 57i CT

Parameter –
featurekeyN type
Type
(in Web UI)
Description
Format
Default Value
A-206
Aastra Web UI
Configuration Files
The type of feature key to configure. Valid types are:
• none - Indicates feature key is disabled.
• line - Indicates the feature key is configured for line use.
• transfer- Indicates feature key is configured for transferring a call.
• conference - Indicates feature key is configured for conference
calling.
• public - Indicates feature key is configured to toggle from public to
private mode. A public and private softkey can be used when at a line
item in the Directory List. The Private key toggles a number in the
Directory List to private. The Public key allows a number in the
Directory List to be sent to the handsets. A 57i CT accepts a
maximum of 50 entries with the public attribute.
• icom - Indicates the feature key is set to be used to make an
intercom call.
• directory - Indicates the feature key is set for accessing the Directory
List.
• callers - Indicates the feature key is set for accessing the Callers List.
• park- Indicates the feature key is configured to park incoming calls
when pressed.
• pickup- Indicates the feature key is configured to pick up parked calls
when pressed.
• flash - Indicates the feature key is set to generate a flash event when
it is pressed CT handsets. The IP phone generates flash events only
when a call is connected and there is an active RTP stream (for
example, when the call is not on hold).
Text
None
Operation->Handset Keys
aastra.cfg, <mac>.cfg
41-001160-01, Rev 00, Release 2.3