Expansion Module - Welch Allyn PROPAQ CS Service Manual

90 Repair procedures

Expansion Module

The Expansion Module housing contains one or all of the following (see below):
• printer mechanism with Printer Main Board
• MSP Board (units with CO
• CO
• SCP/SpO
• SpO
• SpO
• front panel assembly with pushbuttons
• SSP Board (units with Sidestream CO
• Stick Board (units with Sidestream CO
• Extender Board
Note
expansion assy
Printer
Front Panel,
no SCO2
Front Panel,
with SCO2
Note
2
connector side panel
2
Board (units with printer and SpO
2
connector side panel
2
speaker side panel
2
For specific option configurations, refer to drawings in
page 106.
Filler Panel
SpO2 Connector Panel
CO2 Connector Panel
Main Housing
Printer Door
SSP Board
Extender Board
Stick Board
The Expansion Module does not need to be separated from the monitor to
replace the Expansion Module front panel.
option)
options)
2
)
2
)
2
Rear Panel
SpO2 Board
SCP Board
SpO2 Board
Expansion Module
Assembly
Components
MSP Board
Welch Allyn Propaq CS Vital Signs Monitor
"Monitor options"
Speaker Panel
Filler Panel
1097-03
on