Identifying The Acuity Communication Options; Monitor Controls; Self Test And Service Menus - Welch Allyn PROPAQ CS Service Manual

Service Manual

Identifying the Acuity Communication options

Monitor controls

Nurse Call
option
SpO Option
2
Mainstream
CO Option
2
Printer Option
Sidestream
CO Option
2

Self test and service menus

The Propaq CS monitor includes built-in self-tests that verify the integrity of its hardware
and software each time you turn it on. If the monitor turns on and displays the Main
Menu, all self-tests were passed. If a self-test results in a failure, a message and error
code are displayed indicating the failure mode. Refer to
contact Welch Allyn Technical Support for help.
Wireless Acuity option is identified by
the yellow antenna cap on the top corner
of the monitor.
MONITOR DEFIB SYNCHRO
! !
3A
EKG x 1000
2AG
!
!
12-28V, 3A
"Troubleshooting"
Overview 9
Hardwired Acuity option
is identified by the Acuity
connector jack on the
monitor right side panel.
Alarm Light
Alarm(s) Off Light
Suspend/
Resume Alarm
Suspends alarm tone for
90 seconds or resumes
alarm tone (if active)
Start/
Stop NIBP
Starts or stops NIBP
reading
Home
Returns the display to
the Main Menu
Printer Buttons
on page 55 and