Page 1
Propaq LT Outline Train the Trainer A. Propaq LT and LTR Propaq LT – Standalone monitor Propaq LTR – Monitor that has the wireless Acuity feature enabled 1. Lightweight (Less than 2 pounds) 2. Uses rechargeable lithium ion battery 3. Compatible with 3 or 5 lead ECG cables 4.
Page 2
C (brown)-place in the intercostal space equivalent to the V1, V2, V3, V4, V5, or V6 position you want to monitor 5. Always attach lead wires to electrodes before applying to patient. Confirm that the Propaq LT displays the ECG waveform, heart rate, and other patient data. If the Propaq LT detects that some lead wires are not properly connected, the Propaq LT indicates which leads are disconnected.
Page 3
1. There are 6 alarm parameters that can be set and adjusted on the Propaq LT 2. Once you have your Propaq LT monitor on, use your arrows keys and select key to highlight the blue bell icons on the bottom of the LCD screen 3.
< than 15 minutes 2. Inspect and Clean the Monitor and Accessories a. To clean the Propaq LT, Charging station, Accessories: Wipe with equipment with a nearly–dry cloth moistened with one of the approved cleaning solutions in the Directions For Use manual.
Page 5
HR/PR source can disable HR/PR alarm limits power source filter HR/PR upper and lower alarm limits (adult, pediatric, and neonate) NIBP mode systolic upper alarm limit (adult) o Diastolic upper alarm limit (adult) o Systolic lower alarm limit (adult) Propaq LT Outline SM 2840 Rev B 09/2011...
Page 6
Respiration on/off respiration vector select (adult, pediatric, and neonate) Respiration upper and lower alarm limits (adult, pediatric, and neonate) Patient name room number Language buttons lock-out enable Back light time out ECG bandwidth Propaq LT Outline SM 2840 Rev B 09/2011...