Welch Allyn PROPAQ CS Service Manual page 2

ii
Copyright 2008 Welch Allyn. All rights are reserved. No one is permitted to reproduce or duplicate, in any form, this manual or
any part thereof without permission from Welch Allyn.
Welch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the product, that may
result from failure to use this product in accordance with the instructions, cautions, warnings, or statement of intended use
published in this manual.
® ®
Welch Allyn , Propaq , Acuity
™
ParamSet is a trademark of Welch Allyn.
® ®
SET , LNOP , and Masimo
equipped monitor does not convey any express or implied license to use the device with unauthorized sensors or cables
which would, alone or in combination with this device, fall within the scope of one or more of the patents relating to this
device.
® ®
Nellcor and Oximax are registered trademarks of Nellcor Puritan Bennett.
Software in this product is copyright Welch Allyn or its vendors. All rights are reserved. The software is protected by United
States of America copyright laws and international treaty provisions applicable worldwide. Under such laws, the licensee is
entitled to use the copy of the software incorporated with this instrument as intended in the operation of the product in
which it is embedded. The software may not be copied, decompiled, reverse-engineered, disassembled or otherwise
reduced to human-perceivable form. This is not a sale of the software or any copy of the software; all right, title and
ownership of the software remain with Welch Allyn or its vendors.
For information about any Welch Allyn product, call the nearest Welch Allyn representative:
USA 1 800 535 6663
Canada 1 800 561 8797
European Call Center + 353 46 906 7790
Germany + 49 747 792 7186
Latin America + 1 305 669 9003
Singapore + 656 419 8100
United Kingdom + 44 207 365 6780
This device complies with Part 15 of the FCC rules and with the rules of the Canadian ICES-003. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution! Changes or modifications not expressly approved by Welch Allyn could void the purchaser's authority to operate
the equipment.
Reorder Part Number 810-2736-XX (CD)
Reorder Part Number 810-2737-XX (Printed)
Manual Part Number 810-2708-00 Rev A, 01/2008
Welch Allyn Protocol, Inc.
8500 SW Creekside Place
Beaverton, OR 97008-7107 USA
www.welchallyn.com
Printed in USA
® ® ®
, FlexNet , Smartcuf , and Flexible Monitoring
®
are registered trademarks of Masimo Corporation. Possession or purchase of a Masimo SpO
+ 1 315 685 4560
Welch Allyn Ltd
Navan Business Park
Dublin Road, Navan
County Meath, Republic of Ireland
Welch Allyn Propaq CS Vital Signs Monitor
®
are registered trademarks of Welch Allyn.
Australia + 6129 638 3000
800 074 793
China + 86 216 327 9631
France + 331 6009 3366
Japan + 8133 219 0071
Netherlands + 3115 750 5000
South Africa + 2711 777 7555
Sweden + 46 85 853 6551
-
2