Welch Allyn PROPAQ CS Service Manual page 69

Service Manual
Keep the battery away from children. Do not disassemble it and do not incinerate or burn
it.
The battery maintains programmed defaults and time of day. Without the battery, the
values for these items return to the factory settings. If the power up error message TIME/
DATE SETTINGS LOST is displayed, reprogram the time and day and monitoring default
parameters according to the procedures described in the Propaq CS Directions For Use.
You must remove the battery pack before opening the monitor case and replacing
components. A Propaq CS monitor without options contains a single battery pack. A
monitor with an option package uses a dual battery package.
Within the European Union
Do not dispose of this product as 'unsorted municipal waste'. Prepare it for reuse
or separate collection as specified by Directive 2002/96/EC of the European
Parliament and the Council of the European Union on Waste Electronic and
Electrical Equipment (WEEE).
Note
For more specific disposal information, see www.welchallyn.com/weee, or contact Welch
Allyn Customer Service.
Outside the European Union
When the monitor or the battery reaches end of life, recycle it locally according to
national, state, and local regulations, or return it to Welch Allyn.
WARNING Do not pinch the battery wires when inserting the battery pack into
the Propaq CS monitor. Monitor failure or fire could occur if wires get pinched.
If the monitor or the battery is contaminated, this directive does not apply.
Repair procedures 65