Acquisition Module Types; Type - Welch Allyn RScribe User Manual

Acquisition Module Types

Two acquisition module types, the Wireless Acquisition Module (WAM) or AM12 patient cable, for ECG
acquisition are used with RScribe.
WAM with Lead Wires
Figure 1 WAM with Lead Wires
Replaceable
Lead Wires
Power On/Off
LED Indicators
The WAM incorporates frequency-hopping technology in the 2500 MHz frequency range with 40,000 Hz ECG
acquisition and is operated by two buttons located on the front of the device when used with RScribe:
1. Power On/Off
2. Acquiring a 12-lead ECG
NOTE: Rhythm button is non-functional for use with RScribe.
The WAM uses one AA alkaline, 1.5V battery for approximately 8-hours of continuous operation.
WARNING: Use of other cells may present a risk of fire or explosion.
USB Transceiver Key (UTK)
The UTK connected to the RScribe USB port receives ECG signals from the paired
WAM for presentation of the electrocardiogram. The UTK connected to USB cable
(6400-015) from the PC port is positioned in an unobstructed location.
12-Lead ECG button
Rhythm button
Battery compartment
INTRODUCTION
Page | 25