Turnaround Polling; Being Polled (Polling Standby); Polling Security - Sharp UX-222 Operation Manual

POLLING
Turnaround Polling
After pollinga machine,you can senda documentto it on the sameconnection.Simplyplacethe
documentto be sent in the
feeder
and carry out the pollingprocedure.When pollingis finished,
the documentwill be automatically transmitted.
~>Note:
The othe~- machine mllst also hu~'cTut-na]-outld P oiling (upubili~.
Being polled (Polling Standby)
To let another machine poll your
machine,simplysetthe Receptionmodeswitchto
FAX, and load
the document(s) to be sent
in the usualfashion.
Transmission
will take place when the other machine calls
your machine
Automaticreceptionis possiblewhile
your machine is on polling standby.
Polling Securitv .
and activates polling.
—
Polling Security is used to prevent unauthorized polling of your machine. When this function is
activated, polling will only take place when one of the following conditions is met:
s The fax number of the polling machine has been entered into your machine as
having permission to poll you. (The polling machine must also have its fax number
programmed in itself, as described in "Entering your name and fax number" in
Chapter 2.)
The polling machine has an ID number (see "Entering ID numbers for polling
permission" which follows in this section), and this number has been entered into
your machine as having permission to poll you.
~~
Important:
ID tzllmbet"s ( an o~ll> be llsed iftile othe~-ja.rmachine is also a Shut-pmu(hint'.
OTHER FUNCTIONS
6-5