Turnaround Polling; Polling Security - Sharp UX-108 Operation Manual

Polling (Requesting a Fax Transmission)

Turnaround polling

After polling a fax machine, you can send a document to that machine during
the same connection. Simply place the document to be sent in the feeder and
follow the steps described above in "Requesting transmission". When polling
is finished, the document will be automatically transmitted.
♦ The other fax machine must also have Turnaround Polling capability.
♦ Turnaround Polling cannot be done when a timer transmission operation
is set.
Being polled (polling standby)
To let another fax machine poll your fax, simply set the reception mode to
FAX, and load the document(s) to be sent.
Transmission will take place when the other fax machine calls your fax and
activates polling. Automatic reception is possible while your fax is on polling
standby.

Polling security

Polling Security allows you to prevent unauthorized polling of your fax.
When this function is turned on, polling will only take place when the fax
number of the polling fax machine has been entered in your fax's list of
permitted fax numbers (called "passcode numbers"). The number of the
polling fax must also be programmed in itself for identification.
To use Polling Security, follow the steps below to turn the function on, and
then enter permitted numbers as shown on the following page.
1
Press the keys shown at right.
ENTRY MODE will appear in the
display.
2
Press the # key three times.
SECURITY SELECT will appear in the
display.
3
Press 1 to turn polling security on, or 2 to
turn it off.
58
FUNCTION
3
1
2
or