Chapter 1. General Description; Specifications - Sharp UX-1100 Service Manual

CHAPTER 1. GENERAL DESCRIPTION

[1] Specifications

Applicable telephone line:
Compatibility:
Configuration:
Memory size*:
Compression scheme:
Scanning method:
Resolution:
Recording system:
Display:
Paper capacity:
Reception modes:
Modem speed:
Transmission time* :
Effective recording width:
Input document size:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for procduct
improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some
deviation from these values in individual units.
Public switched telephone
work/PBX
ITU-T (CCITT) G3 mode
Half-duplex, desktop transceiver
512 KB (approx. 31 average pages
with ECM function off)
MH, MR, MMR
Flat-bed, solid-state CCD
Horizontal:
8 dots/mm
Vertical:
Standard−3.85 lines/mm
Fine/Halftone−7.7 lines/mm
Super fine−15.4 lines/mm
Thermal transfer recording
7 x 5 dots, 1 line by 16-digit display
300 sheets
Auto/Manual/Answering machine
9600 bps with automatic fallback to
7200, 4800, or 2400 bps
Approx. 9 seconds
203 mm (average)
Auto feeding:
Width  148 to 216 mm
Length  128 to 356 mm
Manual feeding:
Width  148 to 216 mm
Length  128 to 1000 mm
net- Effective scanning width:
Automatic document feeder: 20 sheets max.
Halftone (gray scale):
Contrast control:
Copy function:
Noise emission:
Power requirements:
Power consumption:
Dimensions:
Weight:
* Based on ITU-T (CCITT) Test Chart #1 at standard resolution in
MMR (Memory Transmition), excluding time for protocol signals
(i.e., ITU-T phase C time only).
1 – 1
UX-1100DE
FO-1450DE
210 mm max.
64 levels
Automatic/Dark selectable
Single/Multi-copy/Sort-copy (99 cop-
ies/page)
Less than 70 dBA
(Measured according to DIN 45635.)
220 - 230 V AC, 50 Hz
5 - 35°C, 20 to 80 % RH
Stand-by: 6 W
Maximum: 110 W
Width: 363 mm
Depth: 488 mm
Height: 188 mm (Without
attachments)
Approx. 5.9kg