Example: PFC and ETS Operation
This section contains examples of DCB input and output policies applied on an interface.
In the example shown in
•
Incoming SAN traffic is configured for priority-based flow control.
•
Outbound LAN, IPC, and SAN traffic is mapped into three ETS priority groups and configured for
enhanced traffic selection (bandwidth allocation and scheduling).
•
One lossless queue is used.
Figure 6-16. Example: PFC and ETS Applied to LAN, IPC, and SAN Priority Traffic
dot1p priority 3
Figure 6-16
for an Aggregator:
dot1p priority
0, 1, 2, 4, 5
Converged LAN, SAN, and IPC traffic
dot1p priority 0-7
SAN
priority 3
IPC
priority 4
Data Center Bridging (DCB) | 79