Environmental Monitoring - Dell PowerEdge M IO Aggregator Command Reference Manual

Mxl 10/40gbe switch io module ftos command reference guide, ftos 8.3.16.1
Hide thumbs Also See for PowerEdge M IO Aggregator:
Table of Contents

Advertisement

Table 22-2. show hardware Commands
Command
show hardware stack-unit {0-5} stack-port
{33-56}
show hardware stack-unit {0-5 unit {0-0} counters
show hardware stack-unit {0-5} unit {0-0} details
show hardware stack-unit {0-5} unit {0-0}
execute-shell-cmd {command}
show hardware stack-unit {0-5} unit {0-0}
ipmc-replication
show hardware stack-unit {0-5} unit {0-0}
port-stats [detail]
show hardware stack-unit {0-5} unit {0-0} register
show hardware stack-unit {0-5} unit {0-0}
table-dump {table name}

Environmental Monitoring

Aggregator components use environmental monitoring hardware to detect transmit power readings,
receive power readings, and temperature updates. To receive periodic power updates, you must enable the
enable optic-info-update interval
Description
View the input and output statistics for a stack-port interface.
View the counters in the field processors of the stack unit.
View the details of the FP devices and Hi gig ports on the stack-unit.
Execute a specified bShell commands from the CLI without going into the
bShell.
View the Multicast IPMC replication table from the bShell.
View the internal statistics for each port-pipe (unit) on per port basis.
View the stack-unit internal registers for each port-pipe.
View the tables from the bShell through the CLI without going into the
bShell.
command. The output in
Figure 22-6
shows the environment status.
Debugging and Diagnostics | 253

Advertisement

Table of Contents
loading

Table of Contents