FIP Snooping
FIP snooping is auto-configured on an Aggregator in standalone mode. You can display information on
FIP snooping operation and statistics by entering
This chapter describes FIP snooping concepts and configuration procedures:
•
Fibre Channel over Ethernet
•
Ensuring Robustness in a Converged Ethernet Network
•
FIP Snooping on Ethernet Bridges
•
FIP Snooping in a Switch Stack
•
How FIP Snooping is Implemented
•
Displaying FIP Snooping Information
•
FIP Snooping Example
Fibre Channel over Ethernet
Fibre Channel over Ethernet (FCoE) provides a converged Ethernet network that allows the combination
of storage-area network (SAN) and LAN traffic on a Layer 2 link by encapsulating Fibre Channel data into
Ethernet frames.
FCoE works with the Ethernet enhancements provided in data center bridging (DCB) to support lossless
(no-drop) SAN and LAN traffic. In addition, DCB provides flexible bandwidth sharing for different traffic
types, such as LAN and SAN, according to 802.1p priority classes of service. For more information, refer
to the
Data Center Bridging (DCB)
Ensuring Robustness in a Converged Ethernet Network
Fibre Channel networks used for SAN traffic employ switches that operate as trusted devices. End devices
log into the switch to which they are attached in order to communicate with other end devices attached to
the Fibre Channel network. Because Fibre Channel links are point-to-point, a Fibre Channel switch
controls all storage traffic that an end device sends and receives over the network. As a result, the switch
can enforce zoning configurations, ensure that end devices use their assigned addresses, and secure the
network from unauthorized access and denial-of-service attacks.
commands.
show
chapter.
8
FIP Snooping | 93