Displaying Fip Snooping Information - Dell PowerEdge M IO Aggregator Command Reference Manual

Displaying FIP Snooping Information

Use the
show
Table 8-1. Displaying FIP Snooping Information
Command
show fip-snooping sessions [interface vlan
vlan-id] (Figure 8-3)
show fip-snooping config
show fip-snooping enode [enode-mac-address]
(Figure 8-5)
show fip-snooping fcf [fcf-mac-address]
(Figure 8-6)
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-address
| fcf-mac-address}
show fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
and Figure 8-8)
clear fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
show fip-snooping system
show fip-snooping vlan
100 | FIP Snooping
commands in Table 8-1 to display information on FIP snooping.
Output
Displays information on FIP-snooped sessions on all VLANs or a specified
VLAN, including the ENode interface and MAC address, the FCF
interface and MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name (WWNN) and the
worldwide port name (WWPN). Information on NPIV sessions is also
displayed.
(Figure 8-4) Displays the FIP snooping status and configured FC-MAP values.
Displays information on the ENodes in FIP-snooped sessions, including
the ENode interface and MAC address, FCF MAC address, VLAN ID and
FC-ID.
Displays information on the FCFs in FIP-snooped sessions, including the
FCF interface and MAC address, FCF interface, VLAN ID, FC-MAP
value, FKA advertisement period, and number of ENodes connected.
Clears FIP snooping information on a VLAN for a specified FCoE MAC
address, ENode MAC address, or FCF MAC address, and removes the
corresponding ACLs generated by FIP snooping.
Displays statistics on the FIP packets snooped on all interfaces, including
VLANs, physical ports, and port channels.
(Figure 8-7
Clears the statistics on the FIP packets snooped on all VLANs, a specified
VLAN, or a specified port interface.
(Figure 8-9) Display information on the status of FIP snooping on the switch (enabled
or disabled), including the number of FCoE VLANs, FCFs, ENodes, and
currently active sessions.
(Figure 8-10) Display information on the FCoE VLANs on which FIP snooping is
enabled.