View The Command History; Upgrading And Downgrading Ftos - Dell PowerEdge M IO Aggregator Command Reference Manual

Figure 4-14. Alternative Storage Location
FTOS#cd usbflash:
FTOS#copy running-config test
!
3998 bytes successfully copied
FTOS#dir
Directory of usbflash:
1 drwx
2 drwx
3 -rwx
4 -rwx

View the Command History

The command-history trace feature captures all commands entered by all users of the system with a time
stamp and writes these messages to a dedicated trace log buffer. The system generates a trace message for
each executed command. No password information is saved to the file.
To view the command-history trace, use the
Figure 4-15.
show command-history
FTOS# show command-history
[5/18 21:58:32]: CMD-(TEL0):[enable]by admin from vty0 (10.11.68.5)
[5/18 21:58:48]: CMD-(TEL0):[configure]by admin from vty0 (10.11.68.5)
- Repeated 1 time.
[5/18 21:58:57]: CMD-(TEL0):[interface port-channel 1]by admin from vty0 (10.11.68.5)
[5/18 21:59:9]: CMD-(TEL0):[show config]by admin from vty0 (10.11.68.5)
[5/18 22:4:32]: CMD-(TEL0):[exit]by admin from vty0 (10.11.68.5)
[5/18 22:4:41]: CMD-(TEL0):[show interfaces port-channel brief]by admin from vty0
(10.11.68.5)

Upgrading and Downgrading FTOS

Note: To upgrade or downgrade FTOS, refer to the Release Notes for the FTOS version you want to load
on the Aggregator.
4096 Jan 01 1980 00:00:00 +00:00 .
2048 May 02 2012 07:05:06 +00:00 ..
1272 Apr 29 2011 16:15:14 +00:00 startup-config
3998 May 11 2011 23:36:12 +00:00 test
Command Example
No File System Specified
command
show command-history
File Saved to USB Flash
(Figure 4-15).
Getting Started | 37