Debugging FIP Snooping
To enable debug messages for FIP snooping events, enter the
Task
Enable FIP snooping debugging on for all or a
specified event type, where:
all
enables all debugging options.
acl
enables debugging only for ACL-specific events.
enables debugging only for error conditions.
error
enables debugging only for IFM events.
ifm
enables debugging only for information events.
info
ipc
enables debugging only for IPC events.
rx
enables debugging only for incoming packet
traffic.
To turn off debugging event messages, enter the
108
|
FIP Snooping
debug fip-snooping
Command
debug fip-snooping [all | acl | error |
ifm | info | ipc | rx]
no debug fip-snooping
command.
Command Mode
EXEC PRIVILEGE
command.