■
Video Signal
Select the setting for the type of equipment you've connected
to the
port. Leave this setting at
Video
using a 60-Hz PAL system (then select
■
Aspect
Sets the image's aspect ratio (ratio of width to height). See
page 54 for more information.
Customizing Projector Features
You can use the Settings menu to lock the buttons on the projector,
adjust audio volume, and customize several other features.
PowerLite S10+
■
Keystone
Adjusts the shape of the image if the projector has been tilted
upward or downward. If you notice that lines or edges look jagged
after adjustment, decrease the
■
(PowerLite X10+/PowerLite W10+ only)
Auto Keystone
Automatically compensates for keystone distortion when the
projector is tilted upward or downward. This feature is available
only when the projector is set for front projection (enabled by
default).
■
(PowerLite S10+ only)
Zoom
Adjusts the image size from
(composite or S-Video signals only)
PowerLite X10+/PowerLite W10+
Sharpness
(larger) to
Wide
unless you are
Auto
).
PAL60
setting (see page 69).
(smaller).
Tele
Fine-Tuning the Projector
73