Connecting A Device; Connecting Video Equipment; Connecting A Computer; Connecting External Equipment - Epson EH-TW7100 User Manual

Preparing

Connecting a Device

Attention
•
Make cable connections before connecting to a power outlet.
•
Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector
of a different shape into the port, it could cause damage and a malfunction to occur.

Connecting Video Equipment

To project images from DVD/Blu-ray players, connect to the projector using an HDMI cable (commercially
available).
c
•
To display signals in the 18 Gbps transmission band, such as 4k60p/4:4:4, use a premium HDMI cable.
If you use a cable that does not support it, images may not be displayed properly. If you experience
any trouble displaying images at 18 Gbps, change the EDID setting to Normal.
EDID p.61
•
You can also connect your AV system to enjoy the audio from connected equipment.
•
When using the power supply port for an optical HDMI cable, connect it to the DC Out (2.0A) power
supply port.

Connecting a Computer

To project images from a computer, connect to the projector using an HDMI cable (commercially available).

Connecting External Equipment

Connecting to the Trigger Out port (EH-TW7100 only)

To connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm) to the
Trigger Out port. When set to on, a signal (12 V DC) is output from this port to communicate the projector's
status (On or Off) to connected devices such as electric screens.
c
When using the Trigger Out port, set the Trigger Out function to Power or Anamorphic Wide.
Extended - Operation - Trigger Out p.65
20
Signal - Advanced -
s
s