Connecting To Video Equipment; Connecting To A Computer - Epson EB-Z8355WUNL User Manual

Connecting to Video Equipment

Observe the following precautions when connecting the projector to external equipment. Be sure to also read the documentation for the external equipment.
Attention
•
Turn off the projector and the external equipment. The projector or external equipment may fail if they are connected while the power is on.
•
Check the shapes of the cable connector and port before connecting them. If connecting them is attempted in the wrong direction or when they do not match, failure or
equipment damage may occur.
Remove the interface cover before connecting external equipment.

Connecting to a Computer

This section provides examples of connecting the projector to a computer. The computer port and cable names may also be different from those given.
Refer to the following when projecting images from a computer that is connected through a network.
q
Projecting with the EasyMP Network Projection application software (provided with the projector) s
Projecting with the EasyMP Multi PC Projection application software (provided with the projector) s
Projecting with the "Connect to a Network Projector" function provided with Windows Vista or Windows 7 s
Computer port
Connection 1 Monitor Out port
"Attaching and Removing the Interface Cover"
s
Connecting cable
5BNC display cable (commercially available)
p.166
EasyMP Network Projection Operation Guide
EasyMP Multi PC Projection Operation Guide
p.124
Projector port
BNC input port
132