Power Switch - Epson TM L90 Technical Reference Manual

PAPER OUT LED (with TM-L90)
❏ Lights when there is no more roll paper or there is little remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Starting the Memory Switch Setting mode" on page 2-23 and"Error code" on page F-3 for
details.)
❏ Off when there is a sufficient amount of roll paper remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Starting the Memory Switch Setting mode" on page 2-23 and"Error code" on page F-3 for
details.)
❏ Flashes when a self test is in progress or when the printer waits for the macro execution
switch to go on.
PAPER OUT LED (with the TM-L90 peeler specification)
❏ Lights when there is no more roll paper or there is little remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Starting the Memory Switch Setting mode" on page 2-23 and"Error code" on page F-3 for
details.)
❏ Off when there is a sufficient amount of roll paper remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Starting the Memory Switch Setting mode" on page 2-23 and"Error code" on page F-3 for
details.)
❏ Flashes when a self test is in progress or when the printer waits for the macro execution
switch to go on.
❏ When the roll paper is inserted and the roll paper cover is closed, one label is ejected and the
LED starts flashing. It flashes until FEED is pressed.
❏ When a label is issued, flashing starts after it is issued. The LED flashes until the label is
removed from the peeler.
POWER LED
❏ Lights when the power supply is on.
❏ Off when the power supply is turned off.
❏ Flashes during execution of each operation.
ERROR LED
❏ Lights when the printer is offline.
❏ Off under normal conditions.
❏ Flashes when an error occurs. (Refer to "Error code" on page F-3 for details)

1.2.4 Power Switch

Refer to "Printer Part Names" on page 1-3 for the power switch location.
Turn on the power by holding down the POWER button 1 second or longer. Turn off the power
by holding down the POWER button 3 seconds or longer.
Rev. B
TM-L90/TM-L90 with Peeler Technical Reference Guide
Product Overview 1-7