B.1.3 Continuous Label Roll Paper
B.1.3.1 Continuous Label Paper
Continuous label paper is label roll paper without labels die cut in predefined sizes. There are
types, back slit type or cut-off edge type:
Feature: Label size (length) is variable with an autocutter; therefore, it is possible to print labels
of various sizes. Compared with die-cut label, it is economic because of no die-cut cut-off edges.
Note:
Cut-off edges make it easier to remove a label from backing paper.
B.1.3.2 Specified Continuous Label Roll Paper
Epson provides the following:
Roll paper
Printing
type no.
method
NTL080-ZEN
Thermal
label
Note:
The TM-L90 can use thermal roll paper with width of 38 ~ 70 mm or roll paper with width of 80 mm.
For two-color thermal roll paper, "Notes on Two-Color Paper Handling" on page B-23.
If solid printing or outline character printing on a label is executed, the print quality may be decreased.
Rev. B
TM-L90/TM-L90 with Peeler Technical Reference Guide
Back slit type
Cut-off edge type
Paper width
Length
80mm {3.15"}
Approx.
40m{1574.8"}
Rolls/b
ox
Other
3 rolls
Continuous label, label size
76mm {2.99" }width
Consumable Specifications B-11