Epson TM L90 Technical Reference Manual page 52

Selecting individual settings
❏ Setting autocutter (TM-L90 only)
First, select the setting for the paper to use by the number of times FEED is pressed. Press the
FEED button the number of times required to select the desired autocutter setting.
Press FEED button
0 times:
1 time:
2 times:
3 or more times:
❏ Selection of Paper and Print density
First, select the setting for the paper to use by the number of times FEED is pressed.
And then select the print density by pressing the FEED button the required number of times.
• Selection of Paper
Press FEED button
0 times:
1 time:
2 times:
3 or more times:
• Selection of Print density
Press FEED button
0 times:
1 time:
2 times:
3 times:
4 times:
5 times:
6 times:
7 times:
8 times:
2-28 Setup
Setting to select
No change
Installed
Not Installed
No Change
Paper type
No change
Monochrome thermal roll paper
Two-color thermal roll paper
No change
Print density Press FEED button
No change 9 times:
100% 10 times:
105% 11 times:
110% 12 times:
115% 13 times:
120% 14 times:
125% 15 times:
130% 16 or more times:
135%
Print density
140%
70%
75%
80%
85%
90%
95%
No change
Rev. B