Epson TM L90 Technical Reference Manual page 58

❏ Label Settings
In "Label Settings", select the maximum length for automatic paper measurement, and then
choose whether with or without the function of feeding paper to the print starting position at
power on.
• Maximum length of automatic paper measurement
Select the maximum length of automatic paper measurement. Match the maximum length of
the auto-measurement with the black mark spacing of the paper used.
Press FEED button
0 times:
1 time:
2 times:
3 or more times:
• With or without the function of feeding paper to the print starting position at power on
Press the FEED button the number of times required to select whether with or without the
function of feeding paper to the print starting position at power on.
Press FEED button
0 times:
1 time:
2 times:
3 or more times:
Setting Various Items via Utilities
Besides the items that can be set in the memory switch setting mode, you can set a variety of
items using the utility software for TM series printers provided by Epson. The utilities are
explained in "Various Utilities" on page 4-7. For details, refer to the relevant materials.
How to Set Various Items with ESC/POS Commands
Besides the items that can be set in the memory switch setting mode, you can set a variety of
items using the ESC/POS commands. The ESC/POS commands are explained in "Introduction
of Control Methods" on page 4-1. (For details, refer to "Error code" on page F-3.)
2-34 Setup
Selected maximum length for automatic paper
measurement
No change
160mm
300mm
No change
Selected paper
No change
Feeding paper to print starting position is executed
at power-on
Feeding paper to print starting position is not
executed at power-on
No change
Rev. B