Tm-L90 Peeler Specification - Epson TM L90 Technical Reference Manual

6.1.2 TM-L90 peeler specification

Print method
Print width
Manual cutter
specification
Possible thickness
to be cut with a
manual cutter
Character sets
Interface
(compatible)
Buffer
D.K.D. function
Power Supply
Operating Voltage
Current
consumption
Temperature
Humidity
Weight (mass)
Rev. B
Thermal line, 8 dots/mm × 8 dots/mm (203 dpi × 203 dpi)
80 mm (factory setting) or 38 to 70 mm can be set using a roll paper spacer
With continuous issuing, it is possible to cut the paper by hand
100 µm or less
95 alphanumeric, 37 international characters, Extended graphics 128 × 11
pages
RS-232C / Bi-directional parallel
Dealer option: USB, 10Base-T I/F, Ethernet
Receive buffer: 4 KB/45 bytes
User-defined buffer
Downloaded bit image:
User-defined characters:
Macro buffer: 2 KB
Non-volatile graphics data buffer: 384 KB maximum
User NV memory: 192 KB maximum
Note) The combination of NV graphics data buffer and user NV memory is
determined by the memory switch. Contact us for the details.
Page mode area: 106 KB
2 drives
Power supplied by AC adapter PS-180 (option)
DC24 V ± 7%
<Single-/Two-color printing>
Average: Approximately 1.7 A (Character font α-N, 42-column printing)
Peak: Approximately 7.7 A
Standby: Approximately 0.1 A
Operating: 5 to 45 °C {41 to 113 °F}
Storage: –10 to 50 °C {14 to 122 °F}
10 to 90%
Approximately 1.9 kg {4.19 lb}
TM-L90/TM-L90 with Peeler Technical Reference Guide
Approximately 12KB
(common for all models)
Approximately 11KB
(for ANK/Multilingual model)
Approximately 15KB
(for Japanese model)
Product Specifications 6-3