Dip Switch Settings - Epson TM L90 Technical Reference Manual

2.7 DIP Switch Settings

With the TM-L90 / TM-L90 peeler specification, you can make various settings with the DIP
switches. The DIP switches are inside the roll paper cover.
Before setting DIP switches, remove the DIP switch cover.
Note:
Set the DIP switches after turning off the printer. The settings will not be enabled if they are set with
the power on.
Rev. B
TM-L90/TM-L90 with Peeler Technical Reference Guide
DIP switch cover
DIP switches
Setup 2-21