Epson TM L90 Technical Reference Manual page 20

❏ Initializing the mechanism(with TM-L90)
You can initialize the mechanism (paper feed operation) with the following procedure.
1. Open the roll paper cover.
2. Close the roll paper cover.
3. Press FEED.
• If the roll paper is inserted after the roll paper cover is opened and closed, the printer
waits for FEED to be pressed, and then the PAPER OUT LED flashes. In this case, press
FEED.
• Caution: When memory switch 8-6 is set to "ON," If the roll paper is inserted when the
power is off, or if the roll paper cover is opened and closed then the power is turned on,
press FEED.
❏ Recovering from errors
When error recovery with FEED is enabled by memory switch 8-1, pressing FEED when a paper
layout error occurs recovers from the error and performs automatic paper layout.
❏ Initializing the mechanism(with TM-L90 with Peeler)
You can initialize the mechanism (paper feed operation) with the following procedure.
1. Open the peeler cover.
2. Open the roll paper cover.
3. Close the peeler cover and the roll paper cover.
4. Press FEED.
• If the roll paper is inserted after the roll paper cover is opened and closed, the printer
waits for FEED to be pressed, and then the PAPER OUT LED flashes. In this case, press
FEED.
• Caution: When memory switch 8-6 is set to "ON," If the roll paper is inserted when the
power is off, or if the roll paper cover is opened and closed then the power is turned on,
press FEED.
❏ Recovering from errors
When error recovery with FEED is enabled by memory switch 8-1, pressing FEED when a paper
layout error occurs recovers from the error and performs automatic paper layout.
1-6 Product Overview Rev. B