B.1.1.3 Print Density Adjustment
For best print quality and reliability, select the proper print density for the paper type used as
described in the table below. If printing is performed with a density that exceeds the density
described in the table below, the reliability ("TM-L90" on page 6-5) is not guaranteed. Print
density can be set with a software command.
Roll paper type no.
--
--
NTP080-80, NTP060-80, NTP080-RB
NTP080-ATG
B.1.1.4 Paper to Use for High Speed
If any of the following original paper types of receipt roll paper is used, the memory switch for
the customized value setting can be used to set a maximum print speed up to 150 mm/s
{5.91"/s} (level 9):
•
TF60KS-E
•
PD160R
•
TF50KS-E
•
P350
•
F5041
•
KF50
Rev. B
TM-L90/TM-L90 with Peeler Technical Reference Guide
Original paper no.
P350
KF50
TF60KS-E, TF50KS-EY, PD750R, F5041
PD160R, TF11KS-ET
Density level
90%
95%
100%
105%
Consumable Specifications B-3