Ending Memory Switch Setting Mode - Epson TM L90 Technical Reference Manual

2.8.3 Ending Memory Switch Setting mode

Once the setting is completed, the contents of the setting are stored; then the printer executes the
initialization. When initialization is finished, the printer returns to normal operating mode.
Note:
We recommend that you to perform the memory switch setting after finishing the paper layout setting
since the roll paper cover needs to be opened and closed for the memory switch setting. For paper layout
settings, refer to "Setting Paper Layout" on page 2-45.
When executing the memory switch setting mode without setting the paper layout, paper is fed every time
the roll paper cover is opened and closed, so paper is wasted.
When you'd like to change the memory switch settings with paper layout unchanged, it is better to change
it using the memory switch setting utility or other means.
2-26 Setup Rev. B