Specified Original Paper; Print Density Adjustment; Paper To Use For High Speed - Epson TM L90 Technical Reference Manual

Note:
The TM-L90 can use thermal roll paper with width of 38 ~ 70 mm or roll paper with width of 80 mm.
For two-color thermal roll paper, "Notes on Two-Color Paper Handling" on page B-23.
If solid printing or outline character printing on a label is executed, the print quality may be decreased.
B.1.2.3 Specified Original Paper
Use the following original paper types for die-cut label roll paper:
The type number with (*) indicates that it is used for specified die-cut label roll paper.
❏ Single-color thermal label paper type no.:
(*)HD-75
150HA
❏ Two-color thermal label paper type no.:
BR21
B.1.2.4 Print Density Adjustment
For best print quality and reliability, select the proper print density for the paper type used as
described in the table below. If printing is performed with a density that exceeds the density
described in the table below, the reliability ("TM-L90" on page 6-5) is not guaranteed. Print
density can be set with a software command.
Original paper no.
NTL series
--
B.1.2.5 Paper to Use for High Speed
If any of the following original paper types of thermal paper are used, the memory switch for
the customized value setting can be used to set the maximum print speed up to 150 mm/s
{5.91"/s} (level 9):
❏ HD-75, 150HA
B-6 Consumable Specifications
Nippon Paper Industries Co., Ltd.
Richo Co., Ltd.
OJITAC Co., Ltd.
Original roll paper no.
HD75
150HA
Density level
130%
120%
Rev. B