Paper Selection - Kyocera TASKalfa 3050ci Operation Manual

Original Size
X
Standard
Sizes 1
Standard
Sizes 2
Others
Y
210x297m
Size Entry
:
Original
m
Zoom : 100%
:
Paper A4
Preview
Add Shortcut
Status

Paper Selection

Select the paper source that contains the required paper size.
NOTE:
Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper
Settings on page 9-4).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.

Paper Selection

Auto
Cassette
A4
Plain
A3 A4
Plain Plain
:
Original A4
A4 A4
Zoom : 100%
Plain Plain
:
Paper A4
A4 A4
Preview
Plain Plain
Add Shortcut
Status
Copies
(50 - 432)
297
mm
5
# Keys
(50 - 297)
6
210
mm
# Keys
Cancel OK
10/10/2010 10:10
1
2
3
4
Copies
MP Tray
5
MP Tray
6
Paper Set.
Cancel OK
10/10/2010 10:10
4-3
If [Size Entry] is selected, press [+] or [-] to specify
the horizontal size (X) and the vertical size (Y).
Press [# Keys] to enter the size directly using the
numeric keys.
Press [OK].
Press the Start key to start copying.
Press the Copy key.
Place the originals on the platen.
Press [Org./Paper/Finishing] and then [Paper
Selection].
Press the key of the paper source corresponding to
the required paper size. The cassette in which the
paper is loaded is selected.
If [Auto] is selected, the paper matching the size of
the original is selected automatically.
Press [OK].
Press the Start key to start copying.
Copying Functions
4