Kyocera TASKalfa 3050ci Operation Manual page 328

Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Input units
Inch
Metric
Use the procedure below to set the default margin width.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Use the [+] or [-] to enter the margin widths for Left/Right and Top/Bottom.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the available settings.
Item
Off
On
NOTE:
Refer to page 4-44 for Auto Image Rotation.
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [On].
4
Press [OK].
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
Item
Off
On
NOTE:
Refer to page 4-14 for EcoPrint.
-0.75 to 0.75" (in 0.01" increments)
-18 mm to 18 mm (in 1 mm increments)
], [Next] of Function Defaults, [
No Auto Image Rotation performed.
Auto Image Rotation performed.
], [Next] of Function Defaults, [
No EcoPrint performed.
EcoPrint performed.
9-24
Default Setting (System Menu)
Range
] and then [Change] of Margin Default.
Description
] and then [Change] of Auto Image Rotation.
Description