Kyocera TASKalfa 3050ci Operation Manual page 319

Paper Output
Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
Output Tray
Inner Tray*
Tray A, Tray B, Tray C
Finisher Left Tray
Finisher TOP Tray
Right Tray
Job Separator Tray*
Tray 1 to 7
* This cannot be selected when the optional document finisher is installed.
NOTE:
The optional inner job separator, right job separator, 1,000-sheet finisher, and 4,000-sheet finisher are
required.
When [Heavy 3] (164 g/m
destination, the output destination is automatically changed to a tray that can be used.
FAX RX data output can be specified when the optional fax kit is installed.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to select the output tray.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Paper Output.
3
Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE:
FAX Port 1 appears when the optional fax kit is installed.
If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit
(Dual FAX).
4
Select the Output Tray.
5
When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press
the Reset key.
Delivery on the Inner Tray of the machine.
Delivery to trays A - C of the optional 4,000-sheet finisher.
Delivery to the left tray or top tray of the optional 1,000-sheet finisher.
Delivery to the optional right job separator.
Delivery to the optional inner job separator.
Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray).
2
- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output
Descriptions
9-15
Default Setting (System Menu)
9