Kyocera TASKalfa 3050ci Operation Manual page 417

User Login/Job Accounting - User Login
User login administration.
Select authentication method.
Server Type
Off Domain
Default Domain
NTLM
Local
Authentication
Kerberos
Network
Authentication
Ext. Host
Expansion
Host Name
Authentication
Status
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
NOTE:
If the guest authentication setting is enabled, the authentication/logout key must be pressed when
logging in.
Login
Use the procedure below to login.
Enter login user name and password.
Local
Login to:
Login
abcdef
User Name
Login
********
Password
Check Counter
Status
5
Add/Edit
Cancel OK
10/10/2010 10:10
NOTE:
rejected, check the following settings.
•
•
•
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings.
Up to 10 domains can be registered for network
authentication.
6
1
# Keys
2
# Keys
ID Card
Login
NOTE:
Cancel Login
Appendix-9 for details on entering characters.
10/10/2010 10:10
Authentication is possible without selecting an
authentication destination by entering "Login User
Name@domain name" in "Login User Name".
10-3
Select [Local Authentication] or [Network
Authentication]. Select [Off] to disable user login
administration.
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the
Authentication Server. Select [NTLM], [Kerberos]
or [Ext.] as the server type.
If you selected [Ext.] for the server type, enter the
port number.
If the login user name and password are
Network Authentication setting of the machine
User property of the Authentication Server
Date and time setting of the machine and the
Authentication Server
Press [OK].
When the machine is operated and the next screen
appears, select the authentication destination from
the "Login to:" pull-down menu and press [Login
User Name].
Press [# Keys] to enter the login data using the
numeric keys.
Enter the login user name and press [OK].
Refer to the Character Entry Method on
Management
10