Recalling Programs; Editing And Deleting Programs - Kyocera TASKalfa 3050ci Operation Manual

Recalling Programs

Use the procedure below to recall a registered program.
If the Program key is pressed
01 ID Card Copy 02 Eco Copy 03
05 Send 2 06 FAX 1 07
09 10 11
13 14 15
17 18 19
Recall Add Edit
Status
If [Program] is pressed in the copy function screen
01 ID Card Copy 02 Eco Copy 03
Send 2 FAX 1
05 06 07
09 10 11
13 14 15
17 18 19
Quick Setup Org./Paper/ Color/
Finishing Image Quality
Status

Editing and Deleting Programs

You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
No.
Confidential Stamp 04 Send 1
FAX 2 08 Box 1
12
16
20
10/10/2010 10:10
No.
Confidential Stamp 04 Send 1
FAX 2 Box 1
08
12
16
20
Layout/Edit Advanced Program
Setup
10/10/2010 10:10
1
Press the Program key.
2
Press [Recall] and press the key corresponding to
the program number (01 to 50) to recall. Press the
Quick No. Search key or [No.] to enter the
program number directly for recalling.
NOTE:
If the program cannot be recalled, the
Document Box or the form overlay specified in the
program might have been deleted. Check the
Document Box.
[Program] can be pressed in each function to call up
the program registered for the function.
3
Place the originals and press the Start key.
Copying is performed according to the registered
program.
1
Press the Program key.
2
Press [Edit] and press the key(s) corresponding to
the program number (01 to 50) to change or delete.
3
To edit a program, use the procedure for registering
a program and press [Change]. Then change the
program number and program name and press
[Save]. Choose [Yes] in the confirmation screen to
change the program.
To delete the program, press [Delete this Program].
Choose [Yes] in the confirmation screen to finally
delete the program.
3-57
Basic Operation
3