Kyocera TASKalfa 3050ci Operation Manual page 474

Symptom
Perform Tone Curve
Adjustment in the
System Menu. is
displayed.
Colors appear
different than you
anticipated.
Cannot send via SMB.
Checkpoints
Over long periods of use, the
effects of the ambient
temperature and humidity
can cause color output hues
to vary slightly.
Did you choose appropriate
image quality for the original?
Have you loaded color copy
paper into the paper tray?
—
—
—
Is the network cable
connected?
Have the network settings for
the equipment been
configured properly?
Have the folder sharing
settings been configured
properly?
Has the SMB protocol been
set to [On]?
Has the [Host Name] been
entered properly?
Has the [Path] been entered
properly?
Has the [Login User Name]
been entered properly?
Has the same domain name
been used for the [Host
Name] and [Login User
Name]?
Has the [Login Password]
been entered properly?
Have exceptions for
Windows Firewall been
configured properly?
Corrective Actions
Run [Tone Curve Adjustment].
Select appropriate image quality.
Load color copy paper into the
paper tray.
Run [Calibration].
Run [Tone Curve Adjustment].
When making copies
Adjust the color balance.
When printing from a computer
Adjust the color using the printer
driver.
Connect the correct network cable
securely.
Configure the TCP/IP settings
properly.
Check sharing settings and access
privileges under the folder
properties.
Set the SMB protocol setting to
[On].
Check the name of the computer to
which data is being sent.*
Check the share name for the
shared folder.
Check the domain name and login
user name.**
Delete the domain name and
backslash ("\") from the [Login
User Name].
Check the login password.
Configure exceptions for Windows
Firewall properly.
12-6
Troubleshooting
Reference
Page
9-72
3-10
2-28
9-72
9-72
4-35
5-3
2-3
9-92
3-25
3-25
3-25
3-25
3-25
3-25
3-25
3-36