Kyocera TASKalfa 3050ci Operation Manual page 362

Duplex
Select the binding orientation for duplex mode. The table below shows the available settings.
Item
1-sided
2-sided Bind
LongEdge
2-sided Bind
ShortEdge
Use the procedure below to select a duplex setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided], [2-sided Bind LongEdge], or [2-sided Bind ShortEdge].
4
Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
3
Press [+],[–] or the numeric keys to set the default number of copies.
4
Press [OK].
Description
No duplex mode
Longer edge bound
Shorter edge bound
9-58
Default Setting (System Menu)
Finish