Border Erase - Kyocera TASKalfa 3050ci Operation Manual

Border Erase

Use Border Erase to remove black shadows that appear around the outside of the original when making copies.
The following options can be selected.
Border Erase Sheet
Original
Border Erase Book
Original
Individual Border Erase
Original
In each option, the available ranges are as shown below.
Inch Models
Metric Models
NOTE:
To specify the default width value of Border Erase, refer to Border Erase Default on page 9-23 for
details.
Copy
Copy
Copy
Input units
0 to 2"(in 0.01" increments)
0 mm to 50 mm (in 1-mm increments)
Erases black borders around the single sheet original.
Erases black borders around the edges and in the
middle of the original such as a thick book. You can
specify the widths individually to erase the borders
around the edges and in the center of the book.
Specify border erase widths individually for all edges.
Border Erase Range
4-18
Copying Functions